Schwamborn Logo

Schwamborn Giants – The new generation of professional diamond-tipped tools

Professional tools with diamond and PCD tips for a huge range of different applications

ETX technology, and more especially increasingly powerful grinding diamonds have greatly extended the scope for the grinding of modern floors, walls and ceilings. The requirement for the tool is established from answers to the following questions:

  1. Which floor or covering needs to be processed - is the floor hard or soft, and what type of floor covering is involved?

  2. What is the objective for this operation – substrate preparation, renovation or surface texturing?

  3. Which application is needed for this – fine-grinding, coarse-grinding, smoothing out of irregularities or stripping / decoating?

  4. Does this work involve large or small surface areas?

An American football team has many specialists for the different tasks in the game. Similarly, we have developed specific diamond tools, some completely new, the choice of which depends on the combination of answers to the questions opposite.
The aim here is to provide the perfect combination of machine and tool for every task associated with floor construction. This is why we have called our selection of diamond tools the ‘Giants’. After all, and just as in American Football, floor construction involves successful gaining of ground – efficient, cost-effective and goal-oriented.

With the Schwamborn Giants, your next touch down is guaranteed.

Grain sizes and bonding agents

“Hard floors, soft bonding agent – soft floors, hard bonding agent”...

... expresses the basic rule guiding Schwamborn application engineers when they advise on the choice of a diamond tool perfectly matched to the desired outcome. High quality diamond and PCD flakes are bonded into these metal tools, making them wear-resistant. These tools make it possible to grind even the hardest of floors until the desired outcome is achieved.

For substrate preparation, a uniform but coarser grinding result is applied to optimise surface resilience. When producing design floors, you can obtain optimum grinding results using the finest of grain sizes and the correct speed setting on the machine.

Classification

Our new classification is intended as a guide for you. It should not be viewed as a quality grading. Depending on the application and the surface to be machined, it may be more economical to use the equally high-quality AA+ and AA tools to deliver the same level of performance. Typically, and especially for our retail clients and rental parks, the areas to be processed tend to be smaller, measuring up to approx. 100 square metres. Our AA+ and AA tools were specifically designed for these requirements and they are significantly less expensive because they were not designed and built for use in industrial buildings or other surfaces of similar size. They are also less bulky, and this also helps to make them less expensive.

ETX-1 Diamond tools Giants Center

Diamond tools Triple A to grinding for long and hard matches over large areas

C-SC 20 (713000)

red, Grain 20

Soft concrete, screed, asphalt

C-GC 16 (713004)

black, Grain 16

Medium-hard concrete, screed, cement terrazzo

C-GC 20 (713005)

black, Grain 20

Medium-hard concrete, screed, cement terrazzo

C-GC 40 (713006)

black, Grain 40

Medium-hard concrete, screed, cement terrazzo

C-GC 80 (713007)

black, Grain 80

Medium-hard concrete, screed, cement terrazzo

C-GC 150 (713008)

black, Grain 150

Medium-hard concrete, screed, cement terrazzo

C-HC 16 (713009)

yellow, Grain 16

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

C-HC 20 (713010)

yellow, Grain 20

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

C-HC 40 (713011)

yellow, Grain 40

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

C-HC 150 (713012)

yellow, Grain 150

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

C-HC 80 (713014)

yellow, Grain 80

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

C-VSF 16 (713020)

orange, Grain 16

Extremely hard concrete, coatings, epoxy resin

C-VSF 20 (713021)

orange, Grain 20

Extremely hard concrete, coatings, epoxy resin

C-VSF 40 (713022)

orange, Grain 40

Extremely hard concrete, coatings, epoxy resin

C-VSF 80 (713023)

orange, Grain 80

Extremely hard concrete, coatings, epoxy resin

C-VSF 150 (713024)

orange, Grain 150

Extremely hard concrete, coatings, epoxy resin

C-VSF 300 (713025)

orange, Grain 300

Extremely hard concrete, coatings, epoxy resin

C-SBC 40 (713028)

green, Grain 40

Soft to medium hard stone, terrazzo, marble

C-SBC 60 (713029)

green, Grain 60

Soft to medium hard stone, terrazzo, marble

C-SBC 120 (713030)

green, Grain 120

Soft to medium hard stone, terrazzo, marble

C-SBG 40 (713035)

blue, Grain 40

Hard natural stone, granite

C-SBG 60 (713036)

blue, Grain 60

Hard natural stone, granite

C-SBG 120 (713037)

blue, Grain 120

Hard natural stone, granite

C-SSC 20 (713048)

red, Grain 20

Soft concrete, screed, asphalt

C-SSC 40 (713049)

red, Grain 40

Soft concrete, screed, asphalt

ETX-1 Diamond tools Giants Guards

Diamond tools AA+ - the professional solution for medium surfaces

G-SSC 20 (713047)

red, Grain 20

Soft concrete, screed, asphalt

G-GC 20 (713143)

black, Grain 20

Medium-hard concrete, screed, cement terrazzo

G-HC 20 (713144)

yellow, Grain 20

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

G-GC 40 (713161)

black, Grain 40

Medium-hard concrete, screed, cement terrazzo

G-HC 40 (713162)

yellow, Grain 40

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

G-GC 80 (713164)

black, Grain 80

Medium-hard concrete, screed, cement terrazzo

G-HC 80 (713165)

yellow, Grain 80

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

G-VSF 22 (713166)

orange, Grain 22

Extremely hard concrete, coatings, epoxy resin

ETX-1 Diamond tools Giants Tight Ends

Diamond tools AA - if your game only lasts a quarter

TE-SSCR 20 (713221)

red, Grain 20

Soft concrete, screed, asphalt

TE-GCR 20 (713222)

black, Grain 20

Medium-hard concrete, screed, cement terrazzo

TE-GCR 40 (713223)

black, Grain 40

Medium-hard concrete, screed, cement terrazzo

TE-HCR 20 (713224)

yellow, Grain 20

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

TE-HCR 40 (713225)

yellow, Grain 40

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

TE-HCR 80 (713226)

yellow, Grain 80

Hard concrete, micro & synthetic resin terrazzo, coatings, paint, adhesive

TE-VSFR 22 (713227)

orange, Grain 22

Extremely hard concrete, coatings, epoxy resin

ETX-1 PKD-Diamond tools Giants Tackles (Left/Right)

Diamond tools Triple A to grinding for long and hard matches over large areas

TR-Pull D (713043)

Clockwise rotation, gold

Removal of thick, medium-hard coatings (OS 11), adhesive, paint

TL-Pull D (713045)

Counterclockwise rotation, silver

Removal of thick, medium-hard coatings (OS 11), adhesive, paint

TR-Stripp (713109)

Clockwise rotation, gold

Removal of medium-hard coatings, concrete, asphalt

TL-Stripp (713110)

Counterclockwise rotation, silver

Removal of medium-hard coatings, concrete, asphalt

TR-Stripp soft (713111)

Clockwise rotation, gold

Removal of adhesive, paint, asphalt

TL-Stripp soft (713147)

Counterclockwise rotation, silver

Removal of adhesive, paint, asphalt

TR-Stripp-soft P (723064)

Clockwise rotation, gold

with lateral PCD for removing plaster

ETX-1 PKD-Diamond tools Giants Running Backs

Diamond tools Triple A to grinding for long and hard matches over large areas

RB-Barracuda-HC-Splitt (707978)

Soft bond for removing thin, medium-hard coatings, fillers and cementitious adhesives

RB-Barracuda-GC-Splitt (707979)

Medium-hard bond for removing thin, medium-hard coatings, fillers and cementitious adhesives

RB-Barracuda-SC-Splitt (707980)

Hard bond for removing thin, medium-hard coatings, fillers and cementitious adhesives

ETX-2 PKD-Diamond tools Giants Running Backs

Diamond tools Triple A to grinding for long and hard matches over large areas

RB-Barracuda SR PKD (707936)

Removal of thick, medium-hard coatings (OS 11), adhesive, paint

RB-Barracuda HC Splitt (707955)

Soft bond for removing thin, medium-hard coatings, fillers and cementitious adhesives

RB-Barracuda GC Splitt (707956)

Medium-hard bond for removing thin, medium-hard coatings, fillers and cementitious adhesives

RB-Barracuda SC Splitt (707957)

Hard bond for removing thin, medium-hard coatings, fillers and cementitious adhesives

BUSH HAMMERING ROLLERS

Premium tool for roughening the surface and enhancing anti-slipping characteristics and treading safety

Kit bush hammering rollers (707975)

Ø – 270 mm, 3 pieces necessary

Carrier plate (707974)

Kit bush hammering roller

Ø – 200 mm, 3 pieces necessary

Replacement bush hammering roller (707969)

Carrier plate (707976)

Kit bush hammering roller

Ø – 200 mm, 3 pieces necessary

Suction ring with brush cpl. for bush hammering (715922)

ETX-2 carrier - bush hammer (718567)

Ø – 200 mm, 3 pc. required

MILLING TOOLS

Roughening, removal and equalising of paint, dirt, adhesive, foam backing and plastic coverings

Surface milling plates Kit (708507)

complete of 27 x star wheels, 18 washers, 9 x bolts

Surface milling plates Kit (708788)

cpl.

24x spare solid carbide star wheels, 18 discs, 6 drum shafts, 12 bearing blocks

Surface milling plate (713460)

cpl. with 24 solid carbide star wheels,30 x 11,5 x 6,0 mm, 1x necessary

For roughening, removal of coatings, paintings, glue, floor residues leaves a fine finish

Front support wheel (713580)

conversion kit

Surface milling plate (719040)

cpl. with 9 solid carbide star wheels, 30 x 11,5 x 6,0 mm, 3x necessary

Diamond pads Giants Wide Receiver-Superflex (wet application)

For finish grinding and polishing of concrete, screed and terrazzo (wet)

WR-Superflex W (713200)

Grain 50, Ø 76 mm, wet

Screed, concrete, cement terrazzo

WR-Superflex W (713201)

Grain 100, Ø 76 mm, wet

Screed, concrete, cement terrazzo

WR-Superflex W (713202)

Grain 200, Ø 76 mm, wet

Screed, concrete, cement terrazzo

WR-Superflex W (713203)

Grain 400, Ø 76 mm, wet

Screed, concrete, cement terrazzo

Diamond pads Giants Wide Receiver-All Grind (wet application)

For finish grinding and polishing of marble, granite and terrazzo (wet)

WR-All Grind (722000)

Grain 50, Ø 76 mm, wet

Marble, granite, cement terrazzo

WR-All Grind (722001)

Grain 120, Ø 76 mm, wet

Marble, granite, cement terrazzo

WR-All Grind (722002)

Grain 220, Ø 76 mm, wet

Marble, granite, cement terrazzo

WR-All Grind (722003)

Grain 400, Ø 76 mm, wet

Marble, granite, cement terrazzo

WR-All Grind (722004)

Grain 800, Ø 76 mm, wet

Marble, granite, cement terrazzo

Diamond pads Giants Wide Receiver-Best Polish (dry application)

For finish grinding and polishing of concrete and artificial stone (dry)

WR-Best Polish (713082)

Grain 50, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

WR-Best Polish (713083)

Grain 120, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

WR-Best Polish (713084)

Grain 220, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

WR-Best Polish (713085)

Grain 400, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

WR-Best Polish (713086)

Grain 800, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

WR-Best Polish (713087)

Grain 1500, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

WR-Best Polish (713088)

Grain 3500, Ø 76 mm, dry

WR-Best Polish, 10 mm, for crystal finish, concrete, artifical terrazzo

Diamond pads Giants Wide Receiver-Hybrid (dry application)

For finish grinding and polishing of concrete and artificial stone with a longer service life (dry)

WR-Hybrid (722021)

Grain 50, Ø 76 mm, dry

WR-Hybrid, long life, 8 mm, for concrete, artificial terrazzo

WR-Hybrid (722022)

Grain 100, Ø 76 mm, dry

WR-Hybrid, long life, 8 mm, for concrete, artificial terrazzo

WR-Hybrid (722023)

Grain 200, Ø 76 mm, dry

WR-Hybrid, long life, 8 mm, for concrete, artificial terrazzo

Diamond pads Giants Wide Receiver-Superflex (dry application)

For finish grinding and polishing of concrete, screed and terrazzo (dry)

WR-Superflex D (718553)

Grain 200, Ø 76 mm, dry

Screed, concrete, cement terrazzo

WR-Superflex D (718551)

Grain 50, Ø 76 mm, dry

Screed, concrete, cement terrazzo

WR-Superflex D (718552)

Grain 100, Ø 76 mm, dry

Screed, concrete, cement terrazzo

WR-Superflex D (718554)

Grain 400, Ø 76 mm, dry

Screed, concrete, cement terrazzo

Other practical accessories for WDS/DSM machines

From cables to the practical ETX toolbox

Spare velcro fastening disc (601310)

Adapter connection G38/50 (617054)

Adapter connection G50/50 (617207)

Power supply cord (701776)

400V/50Hz, 25 m, 16A, Ø – 2,5 mm²

Power supply cord (707790)

400V/50Hz, 20 m, 32A, 5x 4,0 mm²

ETX carrier plate (707921)

with velcro carrier and foam backing

for diamond pads, grinding discs, Ø – 160 mm

ETX carrier plate (707922)

cpl. with velcro carrier and foam backing

for diamond pads, grinding discs, Ø – 180 mm

ETX carrier plate (707924)

cpl. with velcro carrier and foam backing

for diamond pads, grinding discs, Ø – 200 mm

ETX carrier plate (707926)

cpl. with velcro carrier and foam backing

for diamond pads, grinding discs, Ø – 230 mm

ETX carrier plate (707928)

cpl. with velcro carrier and foam backing

for diamond pads, grinding discs, Ø – 270 mm

Saddle weight (708930)

adjustable, 2 x 25 kg, Kit = 2x

to increase grinding pressure

Diaflex-soft (711817)

3 pc. required (incl. buffers)

3 pcs. required

Damping plate for Diaflex (711823)

Damping bush for Diaflex (711824)

ETX-1 carrier (713042)

Ø – 180 mm, 3 pc. required

ETX-1 carrier (713051)

Ø – 200 mm, 3 pc. required

For holding metal-bonded diamonds ETX-1 and drive plates

ETX-1 carrier (713052)

Ø – 230 mm, 3 pc. required

For holding metal-bonded diamonds

ETX-1 carrier (713053)

Ø – 270 mm, 3 pc. required

For holding metal-bonded diamonds

ETX-1 velcro shoe (713055)

Ø 76 mm for diamond pads

For use with resin bond diamond pads

ETX-2 carrier (713071)

cpl. Ø – 230 mm

For holding metal-bonded diamonds

ETX-2 carrier (713108)

complets Ø – 270 mm

For holding metal-bonded diamonds

Diamond carrier (713469)

Ø 250 mm for resin bond diamond, 1 pc. required

ETX-1 carrier (715736)

Ø – 200 mm, 3 pc. required

For holding metal-bonded diamonds

Diaflex-soft (716282)

3 pc. required (incl. buffers)

Damping plate for Diaflex (716285)

Damping bush for Diaflex (716287)

Toolbox (716490)

incl. 2x 716497 mounting plate ETX diamonds, 1x 716498 ETX-2 for PKD tool, 1x soft-faced mallet

ETX tools storage plate (716497)

for ETX-1 diamond tools

ETX-2 tools storage plate (716498)

for ETX-2 PKD tools

Mounting plate (716499)

diamond pads

Power supply cord (718550)

special 230V/50Hz, 20 m, 16A, Ø – 2,5 mm²

ETX-2 carrier (718564)

Ø – 200 mm, 3 pc. required

Diaflex-soft (719034)

3 pieces required (incl. buffers)

ETX-1 carrier (719080)

Ø 160 mm, 3 pc. required

Kit CEE test plug (722199)

DSM 400 kit (728034)

additional weight 3 x 7,5 kg

Adapter connection 70/50 (617266)

ETX-2 carrier - bush hammer (707970)

Ø – 270 mm, 3 pc. required

ETX-2 carrier - bush hammer (707971)

Ø – 200 mm, 3 pc. required

ETX-1 carrier (709482)

Ø – 253 mm, 6 grooves

Flex brush (709483)

935 mm

Suction ring with brush cpl., high (715925)

Suction ring with brush cpl. (715931)

Y-tube (723073)

Suction hose cpl. (723074)

1x suction hose Ø 38 x 920mm and 2x adapter connection G38/50

Accessories for grinding machines