DRUMS
Exchange drums with and without cutters
Drum with 4 shafts (702132)
w/o equipment
Drum with 8 borings for axles = longer lifetime and less costs per m²
Drum (704361)
With 5-point carbide-tipped cutters, Ø 42 x 6 mm
Drum with exchangeable bushes for axles = longer lifetime and less costs per m²
Drum (704422)
With peeling cutters, Ø 42 x 22 mm
Drum with 8 borings for axles = longer lifetime and less costs per m²
Drum with 4 shafts (704551)
Ø 10 mm, without cutters
Drum (704552)
With 5-point carbide-tipped cutters, Ø 42 x 6 mm
Drum (704738)
With 5-point carbide-tipped cutters, Ø 42 x 6 mm, cowshed preparation
Drum with special equipment for scarifying floors in cowsheds
Drum (707220)
Without cutters, 4 shafts
Drum (707221)
With 8-point carbide-tipped cutters, Ø 80 x 8 mm
Drum with exchangeable bushes for axles = longer lifetime and less costs per m²
Drum (707222)
With peeling cutters, Ø 80 x 20 mm
Drum with exchangeable bushes for axles = longer lifetime and less costs per m²
Drum (717280)
With 8-point carbide-tipped cutters, Ø 80 mm
Drum (717281)
With peeling cutters, Ø 80 mm
Drum (717282)
With 8-point carbide-tipped cutters, Ø 80 mm, fine milling motor
Drum with 6 shafts (717283)
Without cutters, Ø 22 mm
Drum with cutting disc cpl. (717631)
Incl. 66 diamond cutting discs with 4 mm washers
Drum 8-pt. tungst. carbide tipped cutters cpl. (717700)
Drum with 6 shafts (717702)
Without cutters
DRUM CUTTERS
Tipped cutters and peeling cutters for drum retrofitting
Drum shaft (702093)
4 pcs. required
Washers (702659)
hardened
BEF 250, 72 pcs. required; BEF 301, 138 pcs. Required
8-pt. tungst. carbide tipped cutters (702660)
80 x 8 mm
5-pt. tungst. carbide tipped cutters (702674)
42 x 16 mm
BEF 203, 73 pcs. required; BEF 201, 74 pcs. required; BEF 250, 150 pcs. Required
Washer (702678)
hardened
BEF 203, 90 pcs. required; BEF 201, 84 pcs. required; BEF 250, 144 pcs. Required
Drum shaft (707162)
for drum – rough, set = 4 pieces
Bushes for drum (707164)
rough, set = 8 pieces
Drum shaft (709163)
Ø 22 mm, set = 6 pcs.
8-pt. tungst. carbide tipped cutters (713140)
8-point-HME-cutters, ECO version, 80 x 8 mm
5-pt. tungst. carbide tipped cutters (713141)
5-point-HME-cutters, ECO version, 42 x 16 mm
BEF 203, 73 pcs. required; BEF 201, 74 pcs. required; BEF 250, 150 pcs. Required
Washer hardened (714187)
4 mm, 10 pcs. required
Bushes for drum (717344)
Ø 22 mm, 12 pcs. required
Washer hardened (717297)
12 mm, 94 pcs. required
Peeling cutter (718570)
Ø 42 mm
Peeling cutters (718571)
Ø 80 x 20 mm
BEF 250 (36 pieces, required), BEF 301 (36 pieces, required), BEF 320 (36 pieces, required)
Drum shaft (709479)
set = 6 pcs.
HM-socket, 1 set (709480)
12x 717344 + 6x 717712 + 12x 714327
Diamond-cutting disc concrete (hard) (717632)
Washer hardened (717635)
4 mm
Rotor without equipment and cutting discs (717719)
OTHER ACCESSORIES FOR OUR MILLING MACHINES
From practical adapters for connecting dust collectors to rubber couplings
Power supply cord (707790)
400V/50Hz, 20 m, 32A, 5x 4,0 mm²
Kit CEE test plug (722199)
Brush and seal kit (709481)
8x brushes and sealing strips
Fast-charging battery for remote control (717687)
7,2 V
